Patton SmartNode 4830 DSL Series, Руководство пользователя

Страница: 38 / 70

Bootloader 38
SmartNode 4830 DSL Series User Manual 3 • Getting started with the SmartNode
Start-up with factory configuration
Load a new application image (SmartWare) via TFTP
The following procedure downloads the application image (SmartWare) for the mainboard. See the note below
on how to download the respective CLI description file.
Step Command Purpose
1 RedBoot> fis load Copies the SmartWare application image from the
persistent memory (flash:) to the volatile memory
(RAM) from where it will be executed.
2 RedBoot> go -s factory-config Starts the SmartWare application telling it to use
‘factory-config’ as startup configuration.
You can also start-up with any other configuration
available in the persistent memory (nvram:) by
providing its name instead of ‘factory-config’.
Step Command Purpose
1
optional
RedBoot> ip_address - l local_ip_address
[ / mask_len ]
Sets the IP address and subnet mask of the
Ethernet interface 0/0 which shall be used to
receive the new application image.
mask_len is the length of the network address
(or the number of 1’s within the subnet
mask).
See Note below.
2
optional
RedBoot> ip_address -g gateway Sets the IP address of the default gateway.
3
optional
RedBoot> ping -h tftp-server_ip_address Tests the connectivity to the TFTP server.
4 RedBoot> load -r -v -h host -b
base_address file_name
Downloads an application image into the vol-
atile memory (RAM) from where the Smart-
Node could directly execute it.
host : IP address of the TFTP server
base_address : memory location where to
store the application image. Use the default
address 0x1800100
file_name : path and name of the file on the
TFTP server. Note: use the image file that
contains the whole application, not the image
parts.
5 RedBoot> fis delete -n
1
Deletes the first application image.
Reply with ‘y’ to the confirmation request.
6 RedBoot> fis create Stores the downloaded application image to
the permanent memory (flash:).
Reply with ‘y’ to the confirmation request.
7 RedBoot> fis list -l Checks whether the image has been suc-
cessfully stored, whether it is the desired
Release and Build, and whether it is valid.