Loading the Configuration (optional)
39
SmartNode 5541 & 4141 Series User Manual
4
• Initial Configuration
192.168.1.1(ctx-ip)[Router]#
interface WAN
192.168.1.1(if-ip)[WAN]#no ipaddress
192.168.1.1(if-ip)[WAN]#ipaddress WAN 172.16.1.99/24
2002-10-28T00:09:40 : LOGINFO : Link down on interface WAN.
2002-10-29T00:09:40 : LOGINFO: Link up on interface WAN.
172.16.1.99(if-ip)[WAN]#
Copy this modified configuration to you new start-up configuration. This will store your changes in
non-volatile memory. Upon the next start-up the system will initialize itself using the modified configuration.
Note
The modified configuration is applied immediately. It is not necessary to
reboot the device when changing any configuration parameter.
172.16.1.99(if-ip) [WAN]#
copy running-config startup-config
172.16.1.99(if-ip) [WAN]
The SmartNode device can now be connected to your network.
Loading the Configuration (optional)
The
provides a collection of Wizards that help to reduce the setup time of a Patton
device.
Simply download the appropriate Wizard to your device, execute it locally, and you are ready to do phone calls
after the SmartNode has rebooted.
Optionally, you may execute the Wizard that matches your application online, and import the generated .cfg
config into the SmartNode device.
In addition to that the
provides configuration file templates that may fit your application.
Note
If your application is unique and not covered by any of Patton’s configura-
tion templates, you can manually configure the SmartNode instead of load-
ing a configuration file template. In that case, refer to the
Trinity Command
Line Reference Guide
for information on configuring the SmartNode device.
In this example we assume the TFTP server on the host with the IP address 172.16.1.11 and the configuration
named
SN.cfg
in the root directory of the TFTP server.
172.16.1.99(if-ip)[WAN]#copy tftp://172.16.1.11/sn.cfg startup-config
172.16.1.99(if-ip)[WAN]#
After the SmartNode device has been rebooted the new startup configuration will be activated.
172.16.1.99(if-ip)[WAN]#
reload
Press 'yes' to restart, 'no' to cancel :
yes
The system is going down NOW
Additional Information
For detailed information about configuring and operating guidance, set-up procedures, and troubleshooting,
refer to the
Trinity Command Line Reference Guide
www.patton.com/manuals
.
Содержание SmartNode 4141 Series
Страница 49: ...49 Appendix C Cabling Chapter contents Introduction 50 Ethernet 50 Analog FXS 51...
Страница 52: ...52 Appendix D Port pin outs Chapter contents Introduction 53 Ethernet 53 FXS port 53...
Страница 54: ...FXS port 54 SmartNode 5541 4141 Series User Manual D Port pin outs Figure 18 RJ 11 pinout diagram...
Страница 55: ...55 Appendix E SmartNode Device Factory Configuration Chapter contents Introduction 56...
