background image

17

SmartLink 4020 User Manual 

About this guide

Precautions

Notes, cautions, and warnings, which have the following meanings, are used throughout this guide to help you 
become aware of potential problems. 

Warnings

 are intended to prevent safety hazards that could result in per-

sonal injury. 

Cautions

 

are intended to prevent situations that could result in property damage or 

impaired functioning.

Note

A note presents additional information or interesting sidelights.

The alert symbol and IMPORTANT heading calls attention to 
important information.

The alert symbol and CAUTION heading indicate a potential haz-
ard. Strictly follow the instructions to avoid property damage.

The shock hazard symbol and CAUTION heading indicate a 
potential electric shock hazard. Strictly follow the instructions to 
avoid property damage caused by electric shock.

The alert symbol and WARNING heading indicate a potential safety hazard. 
Strictly follow the warning instructions to avoid personal injury.

The shock hazard symbol and WARNING heading indicate a potential electric 
shock hazard. Strictly follow the warning instructions to avoid injury caused 
by electric shock.

IMPORTANT

CAUTION

CAUTION

WARNING

WARNING

Содержание SmartLink 4020


































































































Отзывы: