9
About this guide
This guide describes installing and operating the Patton Electronics Model 3088A/I G.SHDSL
OnSite™ CPE.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1
on page 13 provides information about CPE features and capabilities
•
Chapter 2
on page 16 contains an overview describing CPE operation and applications
•
Chapter 3
on page 28 provides hardware installation procedures
•
Chapter 4
on page 31 provides quick-start procedures for configuring the OnSite CPE
•
Chapter 5
on page 35 describes how to install and operate the OnSite CPE
•
Chapter 6
on page 39 describes how to configure the OnSite CPE, save the configuration, reset the CPE to
the factory default condition, and upgrade the system software
•
Chapter 7
on page 41 describes the system tools that can be used to diagnose problems with the CPE
•
Chapter 8
on page 43 contains information on contacting Patton technical support for assistance
•
Appendix A
on page 46 contains compliance information for the OnSite CPE
•
Appendix B
on page 48 contains specifications for the CPE
•
Appendix C
on page 52 provides the factory default values for the CPE
•
Appendix D
on page 54 provides cable recommendations
•
Appendix E
on page 56 describes the CPE’s ports and pin-outs
For best results, read the contents of this guide
before
you install the CPE.
