manualshive.com logo in svg

Patton IPLink 2603 Series, Руководство пользователя

Поделиться
Скачать
Patton IPLink 2603 Series Скачать руководство пользователя страница 87

MAC Filtering of the Bridge Interface

87

Models 2603, 2621, & 2635 High Speed Routers User Guide 

7 • SNMP Daemon Settings

Enabled Status of System Services

This section allows the user to disable some system services.  By disabling these services, it prevents TCP/UDP 
ports from being opened for processes that are not currently being used.  If the user does not wish to use the 
service, this guarantees there is no security risk.

Note

For changes here to take effect, the configuration must be saved and the 
unit rebooted. This will prevent the service from running at startup.

MAC Filtering of the Bridge Interface

This feature allows the bridge interface to filter traffic through the box based on known MAC addresses. Traffic 
from an unknown MAC address is only permitted to access the IP of the unit itself. This allows a PC joining 
the network to communicate with the DHCP server in the unit in order to obtain an IP address. Once the PC 
has received a lease from the DHCP server, the MAC address is granted permission to cross the bridge; allow-
ing the user extra control of the traffic through the unit.

Note

Administration of this feature is only granted through the CLI.

This screen capture shows the Settings of the Bridge interface.  The important items here are DHCP MAC Fil-
tering and DHCP Filtered Port. DHCP MAC Filtering reports true when the MAC filtering is enabled and 
false otherwise. DHCP Filtered Port is the string name of the port which the filter will be applied to.

Variable

Definition

DNS Client:

Disables use of the DNS Client.

DNS Relay:

Disables use of the DNS Relay.

FTP:

Disables use of FTP.

TFTP:

Disables use of TFTP.

Содержание IPLink 2603 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды