manualshive.com logo in svg

Patton IPLink 2603 Series, Руководство пользователя

Поделиться
Скачать
Patton IPLink 2603 Series Скачать руководство пользователя страница 84

7 • SNMP Daemon Settings

Models 2603, 2621, & 2635 High Speed Routers User Guide

84

SNMP Daemon Settings window

SNMP Daemon Settings window

The SNMP Daemon Settings window enables the user to modify the settings used by the SNMP engine. 
These settings modify the snmpd.cnf file. Changes made to the SNMP Daemon Settings pages will be reflected 
in the file, and likewise any changes made in the file will be reflected on the Daemon Settings pages.

Static Variables

These static variables can be retrieved with an SNMP request, and provide details about this specific unit.  
These variables are modified as a group.

Variable

Definition

System Description:

Description of this unit

System Object ID:

The root object ID of the system.

System Location:

Physical location of unit.

System Contact:

Contact information of the Administrator.

System Name:

The name of this specific unit.

Authentication Traps:

The enabled status of authentication trap messages.

Содержание IPLink 2603 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды