manualshive.com logo in svg

Patton IPLink 2603 Series, Руководство пользователя

Поделиться
Скачать
Patton IPLink 2603 Series Скачать руководство пользователя страница 52

4 • Configuring the IPLink Router

Models 2603, 2621, & 2635 High Speed Routers User Guide

52

WAN Service Configuration

5. Click the 

OK

 button.

The other fields should be:

•

Destination: 0.0.0.0

•

Gateway: 192.168.164.3

•

Mask: 0.0.0.0

•

Cost: 1

•

Interface: [blank]

Central Site Configuration. 

If the router at the ISP or Central site is another IPLink series, follow the instruc-

tions below, if not, consult your third party router user manual for configuration.

See the web pages for the desktop above. Some parametric values are different although the process is the same.

From the command line interface (CLI) via the RS-232 control port:

→

ip list interfaces

→

ip clear routes

→

pppoh clear transports

→

ethernet add transport eth1 ethernet

One IP interface was called ip1 with an IP address of 192.168.1.1

Change the IP address so it is in the same subnet as the laptop PC. The laptop’s IP address is 192.168.172.229, 
so in this example, change the IP address of the IPLink to 192.168.172.3. The default IP mask is 
255.255.255.0.

→

ip set interface ip1 ipaddress 192.168.172.3 255.255.255.0

1. Now you can bring up the web-page management system on your browser by entering the IP address of 

the IPlink.

2. On the Menu, go to Configuration, then to WAN Connections. Delete both default WAN services already 

defined.

3. Click on Create a new service in the main window, select PPPoH_Routed and click on the 

Configure

 

button.

Содержание IPLink 2603 Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды