Configuring IPsec VPN Settings
57
BODi rS BD1000 User Manual
4 • Configuring the WAN
Figure 33. Network > New IPsec VPN Connection
Table 24. IPsec VPN: New Connection Settings
Field
Description
Name
Specifies a name to represent this VPN connection profile.
Active
Check this box to enable the VPN connection.
Remote Gateway IP
Enter the remote peer’s public IP address.
For Aggressive Mode, this is optional.
Local Networks
Enter the local LAN subnets here.
If you have defined “static routes,” they will be shown here too.
Remote Networks
Enter the LAN and subnets that are located at the remote site here.
Main Mode
Choose this Main Mode if both IPsec peers use static IP addresses.
Aggressive Mode
Choose this Aggressive Mode if one of the IPsec peers uses dynamic IP
addresses.
Force UDP Encapsulation
Check this box for UDP encapsulation to be forced regardless of the NAT-
Traversal.