Configuring Outbound and Inbound Firewall Rules
102
BODi rS BD1000 User Manual
8 • Configuring Firewall Settings
After clicking
Add Rule
, the following configuration window displays:
Figure 83. Network > Firewall > Add Firewall Rule
describes the settings for configuring a new firewall rule.
Table 34. Firewall: Inbound/Outbound Firewall Settings
Field
Description
Rule Name
Specifies a name for the firewall rule.
Enable
Specifies whether the firewall rule should take effect.
Select
Yes
for the firewall rule to take effect. If the traffic matches the specified
Protocol/IP/Port, the BD1000 will take action based on the other parameters of
the rule.
Select
No
to disable the firewall rule. The BD1000 will disregard the other
parameters of the rule.
WAN Connection
(*Only applies to inbound)
Specifies the WAN connections for the rule. Available options include:
•
Any (applies to all WAN connections)
•
WAN 1
•
WAN 2
•
WAN 3
•
WAN 4
•
WAN 5
•
Mobile Internet