Configuring Outbound and Inbound Firewall Rules
104
BODi rS BD1000 User Manual
8 • Configuring Firewall Settings
Click
Save
to add the new rule to the
Firewall Rules
table. To reorder the rules in the table, hold the left
mouse button on the desired rule, drag it to the new position, and release the mouse button:
Figure 84. Network > Firewall > Reorder Rules List
To delete a rule from the table, click
. Rules are matched from top to bottom. If a connection matches any
one of the upper rules, the matching process will stop. If none of the rules match the connection, the BD1000
will apply the
Default
rule. The
Default
rule is set to
Allow
for both outbound and inbound access.
Note
If the default inbound rule is set to
Allow
for NAT-enabled WANs,
no inbound allowed firewall rules will be required for inbound Port
Forwarding and inbound NAT Mapping rules. However, if the
default inbound rule is set to
Deny,
a corresponding
Allow
firewall
rule will be required.
