manualshive.com logo in svg

Patton 3086, Руководство пользователя, Страница: 18 / 162

Поделиться
Скачать
Patton 3086 Скачать руководство пользователя страница 18

1 • General Information

Model 3086 G.SHDSL Integrated Access Device User Guide

18

Model 3086 G.SHDSL IAD overview

•

PPPoE (RFC 2516) Client for autonomous network connection. Eliminates the requirement of installing 
client software on a local PC and allows sharing of the connection across a LAN. 

•

User configurable PPP PAP (RFC 1661) or CHAP (RFC 1994) authentication..

ATM Protocols

•

Multiprotocol over ATM AAL5 and Multiprotocol Bridged encapsulation RFC 2684 (Formerly RFC 
1483) and RFC 1577 Classical IP over ATM. Default RFC-1483 route mode.  Logical Link Control 
(LLC)/ Subnetwork Access Protocol (SNAP) encapsulation. Default VC mux mode.

•

ATM UNI 3.0, 3.1, and 4.0 signaling ATM QoS with UBR, CBR, nrt-VBR, and rt-VBR.  

•

Peak cell rate shaping on a per-VCC basis up to 32 active VCCs across VPI 0-255, VCI 0-65525.  Single 
default PVC: 8/35 with PCR=5,500 cells.

Sync Serial Interface 

•

Optional ITU X.21/V.35 Interface 

•

Available with Female M34, DB-25, and DB-15 connectors 

•

User configurable DTE/DCE for X.21

Protocol Support

•

Complete internetworking with IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950), 
ARP (RFC 826).

•

IP Router with RIP (RFC 1058), RIPv2 (RFC 2453), 

•

Up to 64 static routes with user selectable priority over RIP/OSPF routes.

•

Built-in ping facilities.

•

Integrated DHCP Server (RFC 2131). Selectable general IP leases and user specific MAC/IP parings.  
Selectable lease period.

•

DHCP relay agent (RFC 2132/RFC 1542) with 8 individual address pools.    

•

DNS Relay with primary and secondary Name Server selection.

•

NAT (RFC 3022) with Network Address Port Translation (NAPT) for cost-effective sharing of a single 
DSL connection. Integrated Application Level Gateway with support for over 80 applications.  

•

NAT MultiNat with 1:1 mapping.

•

NAT Many:1. 

•

NAT Many:Many mapping. 

•

NAT Port/IP redirection and mapping.  

•

uPNP controlled device for seamless networked device interconnectivity and Windows XP integration.

•

IGMPv2 Proxy support (RFC 2236).

•

Frame Relay with Annex A/D/LMI, RFC 1490 MpoFR and FRF.12 Fragmentation.

Содержание 3086



































































































































































Отзывы:

Нет отзывов