Patton electronics ipRocketLink IAD 3086, Руководство пользователя

Страница: 76 / 196

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide
76 DSLAM Connections with remote CPE units
Leave VCI as 35 and Encapsulation Method as LLC/SNAP. Then click on
Apply
.
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Remote , but change Interface Type to atm . Click on the
Configure
button.
In the Action submenu under G.SHDSL, change Action to Deactivate , then click on Action .
Return to Action, select
Start
and click on
Action
.
PPPoH Bridged Configuration
Model 3086 (Remote) Configuration Steps (PPPoH Bridged)
From the command line interface (CLI) via the RS-232 control port,
fi ip list interfaces
One IP interface is called ip1 with an IP address of 192.168.1.1 Change the IP address so it is in the same sub-
net as both PCs. For example, to 192.168.100.2
fi ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.
2. On the Menu, go to
Configuration
, then to WAN Connections. Delete the factory default WAN services
already defined.