Patton electronics ipRocketLink IAD 3086 Скачать руководство пользователя

Страница: 152 / 196

B • Specifications

Model 3086 G.SHDSL Integrated Access Device User Guide

152

General Characteristics

General Characteristics

•

Compact low-cost plug and play IAD

•

10/100 Ethernet

•

Unlimited host support.

•

Comprehensive hardware diagnostics, works with any operating system, easy maintenance and effortless
installation.

•

Plug-and-Play operation for fast and seamless turn-up with pre-configured WAN and LAN options.

•

Built-in web configuration.

•

Setup allows for standard IP address and unique method for entering an IP address and mask WITHOUT
use of a console connection. Default IP address of 192.168.1.1/24.

•

Simple software upgrade using FTP into FLASH memory.

•

Eight front panel LEDs indicate Power, DSL WAN, Ethernet LAN speed and status.

•

Convenient and standard RJ connectors for Ethernet, Line, and Console.

•

Field Factory Default Option.

•

Standard 1 year warranty.

G.SHDSL Characteristics

•

Full duplex 2.3 Mbps speed over 2-wire (in accordance with ETSI/ITU standard G.991.2). 2.3 Mbps to
4.6 Mbps, full duplex, over 2-wire.

•

DTE Rates 64 kbps to 2.32 Mbps operation. With nx64 with n=1 support.

•

Distance from 24,900 feet (7,590 meters) at 192 kbps to 10,200 feet (3,109 meters) at 2.3 Mbps on
26 AWG (0.4 mm) wire

•

Annex A (ANSI), Annex B (ETSI) PSD selection.

•

2 wire or 4 wire support (4-wire support to be keyed) for multiple line codes per ITU G.991.2 and ETSI TS
101524 with G.994.1 Handshake.

•

CO and CP modes are supported

•

TC-PAM based DSL modulations.

•

EOC Management channel for remote end-to-end management.

Ethernet

•

Auto-sensing Full-Duplex 10Base-T/100Base-TX Ethernet.

•

Standard RJ-45 and built-in MDI-X cross-over switch.

•

IEEE 8021.d transparent learning bridge up to 1,024 addresses and Spanning Tree.

•

8 IP address/subnets on Ethernet interface.

Содержание ipRocketLink IAD 3086





































































































































































































Результаты поиска

Содержание ipRocketLink IAD 3086

Отзывы:

Похожие инструкции для ipRocketLink IAD 3086

Бренды по названию

Популярные бренды

Patton electronics ipRocketLink IAD 3086, Руководство пользователя

Результаты поиска

Содержание ipRocketLink IAD 3086

Отзывы:

Похожие инструкции для ipRocketLink IAD 3086

Бренды по названию

Популярные бренды