Patton electronics ipRocketLink IAD 3086, Руководство пользователя

Страница: 71 / 196

Using the 3086 in Routed or Bridged applications 71
Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations
5. Go to G.SHDSL in the Configuration Menu, then the submenu Status. The Modem State should be
“deactivated.” (If not, go to the Action and change it to deactivate.)
Then in the Action submenu under G.SHDSL, change Action to Start, then click on Action .
Model 3086 (Central) Configuration Steps (PPPoH Routed)
See the web pages for the desktop above. Some parametric values are different although the process is the same.
From the command line interface (CLI) via the RS-232 control port,
fi ip list interfaces
fi ip clear routes
fi pppoh clear transports
fi
ethernet add transport eth1 ethernet
One IP interface was called ip1 with an IP address of 192.168.1.1
Change the IP address so it is in the same subnet as the laptop PC. The laptop’s IP address is
192.168.172.229, so in this example, change the IP address of the 3086 to 192.168.172.3. The default IP
mask is 255.255.255.0.
fi
ip set interface ip1 ipaddress 192.168.172.3 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.