Patton electronics ipRocketLink IAD 3086, Руководство пользователя

Страница: 180 / 196

F • Interworking Functions Information Model 3086 G.SHDSL Integrated Access Device User Guide
180 Frame Relay Service Interworking (FRF.8)
Note After the first several letters of the command are typed pressing the Tab
key will tell the system to complete the variable or command name.
The frs set group command allows the user to setup the configuration of the group variables. The following
example could be used to set the DEMapping variable to “convert”.
Note At the end of the first line the “?” was selected and the system
prompted the user with the possible options available.
fi
frs set group 1 DEMapping ?
convert
one
zero
fi
frs set chn1 DEMapping convert
Set variable attributes on a specified channel
Command: frs set channel # <variable> <value>
The following example could be used to set the DLCI variable to 171.
fi
frs set channel 1 DLCI 171
Web Configuration Methods
The following documentation defines how to configure the FRS channel connections using the web interface
on the x Model 3086. All web interface screens our found under the IWF link.
FRS Overview Screen
By selecting the “FRS Setup (FRF.8)” link below the IWF heading will bring up an overview of the FRS con-
nection available within the system. This page shows a top level view of the eight groups available. The