Managing Operator Actions
61
FS6300 NMS User Manual
4 • Configuring and Managing Devices
4.
Click the
Hard Reset
button.
Set the factory default configuration
To set the factory default configuration for a device:
1.
In the main menu tree under
Network Maps
, navigate to the
Chassis
or
Card/Slot.
2.
Right-click on the card’s icon in the main window and select
Operator Action
. The
Reset Options
win-
dow appears. It shows the card model, IP address, and software revision of the card.
Figure 49. Set Factory Default Configuration
3.
Select
Set Factory Default Configuration
from the menu tree in the Reset Options window.
4.
Click the
Set Factory Default Configuration
button.
5.
Click the
Hard Reset
button.
The
Hard Reset
process will reset ALL of the system’s values to
the original factory settings. After resetting these values, the sys-
tem will continue to function the same until the system is reboo-
ted.
The
Hard Reset
process will reset ALL of the system’s values to
the original factory settings. After resetting these values, the sys-
tem will continue to function the same until the system is reboo-
ted.
IMPORTANT
IMPORTANT
