Introduction
58
FS6300 NMS User Manual
4 • Configuring and Managing Devices
Introduction
Devices can be individually configured and monitored through the FS6300 NMS. The NMS organizes devices
by geographical area in the
Network Maps
section of the menu tree, where device-specific menus can be
viewed by right-clicking on a device. Devices can also be monitored through the
Network Database
section of
the menu tree.
This chapter describes what information you can find and configure about specific devices through the Net-
work Maps and Network Database sections of the FS6300 NMS.
Adding Devices
To add individual devices to the FS6300 NMS:
1.
Click
Setup(F)
at the top of the screen, then click
Add
Device(o)
.
OR
, press
Ctrl+O
. The
Add SNMP Device
window appears.
Figure 44. Add SNMP Device window
2.
Enter the
IP address
and
Netmask
of the device you want to add.
3.
If desired, you may modify the
SNMP Password
and
SNMP Agent Port
.
4.
If you don’t want to monitor the status of your request to add this device to the system, select the checkbox
for
Process Add SNMP Device request in the background
.
5.
Click
Add Device
.
