![background image](http://html1.mh-extra.com/html/patton-electronics/etherbits-2211/etherbits-2211_getting-started-manual_4062529011.webp)
11
Models 2211 & 2232 Getting Started Guide
About this guide
General observations
Clean the case with a soft slightly moist anti-static cloth
Place the unit on a flat surface and ensure free air circulation
Avoid exposing the unit to direct sunlight and other heat sources
Protect the unit from moisture, vapors, and corrosive liquids
Factory default parameters
device server EtherBITS Universal Single-Port Device Server have the following factory default parameters.
Ethernet IP address:
192.168.161.5
Login:
root
Password:
root
Static IP address
Filter: “All services and ports are accessible from any host.”
Serial port: 9600 data rate , 8-bits, no parity, 1 stop bit, no flow control
The external power adaptor shall be a listed limited power source that incor-
porates a disconnect device and shall be positioned within easy reach of the
operator. The mains outlet shall be within 10 feet (3 meters) of the device,
shall be easily accessible, and protected by a circuit breaker.
Hazardous network voltages are present in WAN ports regardless of whether
power to the unit is ON or OFF. To avoid electric shock, use caution when near
WAN ports. When detaching the cables, detach the end away from the
device first.
In accordance with the requirements of council directive 2002/
96/EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
WARNIN
WARNIN