43
QRSS
Initiates a built-in 2
20
bit pseudo-random
pattern generator and detector.
To perform a V.52 test, follow these steps:
1.
Activate the local loopback or remote loopback diagnostic.
2. Activate the test pattern. This may be done in one of two ways:
a. Enter Test Pattern from the System
Diagnostics/Statistics menu and toggle the <Spacebar>
until the desired test pattern appears.
One of two result codes will appear to the right of the
Test Pattern listing:
OK Indicates that the received test pattern is error-free.
BE Indicates that there are errors in the test pattern (to
deliberately insert errors in the pattern, toggle
Error Insertion to ON).
b. Toggle the front panel switch to either PAT or PAT/E (Test
Pattern with Error Injection).
44
APPENDIX A
PATTON NETLINK-T1 MODEL 2710RC
SPECIFICATIONS
WAN Speed:
1.544 Mbps
WAN Connection:
RJ-48C
Nominal Impedance:
100 Ohms
DTE Interface:
EIA-530, ITU/T V.35
Line Coding:
AMI/B8ZS
Line Framing
D4/ESF/Unframed
Receive LBO:
Automatic
Transmit LBO:
Selectable - 0, 7.5,
15, or 22.5 dB, plus DSX-1
Clock Options:
Internal, external or network clock
Diagnostics:
Responds to CO-initiated D4 loopup
and loopdown codes, ESF line loop
and payload loop FDL messages,
Universal Loopback De-activate mes-
sage
Standards:
AT&T TR62411, TR54016, ANSI T1.403
Power Supply:
120VAC, 60 Hz to 5VDC 300mA wall-
mount transformer or UI 100-240VAC,
50 Hz to 5 VDC, 3A wall-mount trans-
former
Dimensions:
3.5”L x 2.1”W x 0.78”H (9.0 x 5.3 x 1.9
cm)
Test Modes:
Initiates and Responds to both V.54
and CSU Remote Loops; Local Loop
Pattern Generator/Detector
User Selectable 511, 2047, or QRSS
d
c
c
