EN
158
EN
159
PARALLEL GUIDE
Slide the parallel guide
5
into the paral-
lel guide slide in
11
.
1
Set the desired distance and tighten
the parallel guide clamping knob
8
.
2
CUTTING DEPTH
1.
Open the depth clamping knob
3
.
2.
Set the smallest possible cutting
depth for your purpose.
Note:
When cutting wood, the cutting
depth should somewhat exceed the
thickness of the material.
1
Close the depth clamping knob
3
.
Make a test on a spare piece before
starting on the workpiece.
2
SAW BLADE REPLACEMENT
Press the spindle lock button
2
.
Caution!
Make sure the tool is
switched off and unplugged and
wear protective gloves.
1
Press the spindle lock button
2
again
and tighten the crew and washer
10
with the hex key.
Caution!
The convex surface of the
big washer must point outwards.
4
Place a new saw blade in the tool.
Caution!
Observe that the rotation
direction of the saw blade corre-
sponds with the indication on the tool.
3
Loosen the screw and washer
10
with
the hex key and remove the saw blade.
2
CUTTING ANGLE
1.
Open the bevel angle adjustment
lock knob
9
.
2.
Set the desired bevel angle.
1
Close the bevel angle adjustment lock
knob
9
.
Make a test on a spare piece before
starting on the workpiece.
2
1
1
2
1
2
3
4
1.
1.
2.
2.
2
1
1.
1.
2.
2.
2
