EN
138
1
2
2
1
3.
2.
1.
2.
1.
3.
2
1
3.
2.
1.
2.
1.
3.
1
1
2
2.
1.
1.
2.
SANDING PLATE
Suitable for: Wood, paint
Swing out the locking lever
2
by 180°,
and turn it until you can remove the
clamping screw
5
.
1
Place the sanding plate, so that all met-
al pins fit in its slots. Fix the clamping
screw
5
by turning the locking lever
2
.
Swing locking lever back to tool.
2
Align the holes in the sanding paper
with the ones in the sanding plate and
press the sanding paper into place.
3
SEGMENT SAW BLADE
Suitable for: Wood, plastic, non-ferrous
metals
Swing out the locking lever
2
by 180°,
and turn it until you can remove the
clamping screw
5
.
1
Insert the segment saw blade, so that
all metal pins fit in its slots. Fix the
clamping screw
5
by turning the locking
lever
2
. Swing locking lever back to tool.
2
SPEED CONTROL
Use the speed control
6
while the ma-
chine is running.
High oscillation frequency for:
Hard materials (metal, wood, tiles...)
Low oscillation frequency for:
Polishing varnishes
1
LED LIGHT
The LED light
3
turns on automatically
when the machine is switched on.
The LED light
3
turns off when the ma-
chine is switched off.
Caution!
Do not look directly into
the work light of the tool.
2
ATTACH BATTERY
Switch On / off switch to off (0 is vis-
ible). Slide a charged battery
8
(not
included) into the battery slot until it
clicks into place.
1
REMOVE BATTERY
To remove the battery
8
, press the bat-
tery release switch
9
and pull out the
battery.
2
