2020
To remind activated status of the valet function, the LED will flash continuously twice if you turn ON the
ignition key.
2. Valet function usage with ignition key (this function operates too, if the PIN code
emergency switching OFF function is programmed for the 3. operating opportunity, for the
PIN code emergency switching OFF on ignition ON, automatically operation):
Activation of the Valet function:
At disarmed alarm, turn ON and OFF the ignition
key as many time as first digit of the PIN code of
the alarm. During turn ON the ignition key the
LED is ON, and after the first digit you have to
wait to switch OFF the LED.
After that immediately turn ON and OFF the
ignition key as many time as the second digit.
After the LED switching OFF, turn ON and OFF the
ignition key as many time as the third digit.
The LED flashes some times signed arming of the
valet function.
Deactivation of the Valet function:
Turn ON and OFF the ignition key as many time as
first digit of the PIN code of the alarm. During
turn ON the ignition key the LED is ON, and after
the first digit you have to wait to switch OFF the
LED.
After that immediately turn ON and OFF the
ignition key as many time as the second digit.
After the LED switching OFF, turn ON and OFF the
ignition key as many time as the third digit.
After that the valet function will be in disarmed
status.
To remind activated status of the valet function, the LED will flash continuously twice if you turn ON the ignition key.
3. Valet function usage with brake pedal/handbrake (this function operates too, if the PIN
code emergency switching OFF function is programmed for the 2. operating opportunity, for
the PIN code emergency switching OFF with usage of brake pedal/hand brake operation):
Activation of the Valet function:
At disarmed alarm, turn ON the ignition key, and
push/draw the brake pedal/hand brake as many
time as first digit of the PIN code (the brake
pedal/hand brake operate with CAN-BUS signals
not in every car types, therefore they can’t be
used for valet function not in every cars!) During
push/draw of the brake pedal/hand brake the LED
is ON, after the first digit, you have to wait to
switch OFF the LED.
After that immediately push/draw the brake
pedal/hand brake as many time as the second
Deactivation of the Valet function:
Turn ON the ignition key, and push/draw the
brake pedal/hand brake as many time as first digit
of the PIN code. During push/draw of the brake
pedal/hand brake the LED is ON, after the first
digit, you have to wait to switch OFF the LED.
After that immediately push/draw the brake
pedal/hand brake as many time as the second
digit.
After the LED switching OFF push/draw the brake
pedal/hand brake as many time as the third
digit. After that the valet function will be in
