22 |
P a g e
sleep, or hibernate when the system voltage reaches the specified value in the "Auto On/Off Threshold" field.
Allow user to cancel auto shutdown
- If check-marked, a button will be present to cancel the auto computer
off timer. Canceling the timer would avoid an auto-off shutdown, sleep, or hibernate. NOTE: This does not
apply to the Vehicle Battery Protector Shutdown.
Shutdown Delay
- If "Auto Computer Off" is enabled, this will set the delay time for shutdown, sleep, or
hibernate after the auto off threshold has been reached. The format is "HOURS:MINUTES". Setting it to 0:00
will produce a 30 second delay.
Vehicle Battery Protector Shutdown
Shutdown immediately at critical battery voltage
- If check-marked, the computer will initiate a shutdown
approximately 1 minute after the system voltage goes below the value set in the "Voltage" field.
NOTE
: If the computer is in sleep mode when this threshold is met, it will wake up the computer and then
initiate a shutdown in approximately 1 minute.
Auto On/Off Threshold
The voltage at which the "
Auto Computer On
" and "
Auto Computer Off
" functions operate. The
"
Shutdown
", "
Sleep
", and "
Hibernate
" options set what the computer will do when the threshold is met.
Shutdown
- If the system voltage goes below the threshold, the computer will initiate a shutdown. If the
system voltage goes above the threshold, the computer will turn on.
Sleep
- If the system voltage goes below the threshold, the computer will go to sleep. If the system voltage
goes above the threshold once the computer is in sleep mode, it will not attempt to wake up the computer.
Pressing the power button, a button on the keyboard, or a mouse click will wake the computer. If the system
voltage goes above the threshold while the computer is off, it will turn on the computer.
NOTE
: If you wake up the computer once sleep mode was initiated, the RTi Control Panel will assume that you
wish to continue working on the computer. The sleep timer will not be initiated again until the voltage
threshold is crossed again or the computer is restarted.
Hibernate
- If the system voltage goes below the threshold, the computer will enter hibernate mode. If the
system voltage goes above the threshold once the computer is in hibernate mode, it will resume Windows. If
the system voltage goes above the threshold while the computer is off, it will turn on the computer.
NOTE
: If you resume the computer once hibernate mode was initiated, the RTi Control Panel will assume that
you wish to continue working on the computer. The hibernate timer will not be initiated again until the voltage
threshold is crossed again or the computer is restarted.
