9
2.
Attach 22433 (Hub, 2.4 motorized) to 295047G (Assem, 1.8m nav Yoke Galv.) to yoke as
pictured below. (This will require two people to lift Hub Assem into place use pre attached
shoulder bolts in Yoke assem)
3.
Using TS-CLMP ( Clamp, actuator kit for thompson) hardware and spacers (250024
( Spacer, 5.0 Hub Elevation)) that were removed earlier, attach TS36BRC (Thompson
actuator 36”) to 22433 (Hub, 2.4 motorized) as pictured below.
4. Using 295046 (SPACER, .44) and matching hardware, attach TS36BRC to 295047G (Assem
1.8m nav Yoke Galv.) as pictured below.
NOTE
: For ease of panel and radial beam assembly, make sure hub is orentated as pictured.
Reflector Assembly (continued)
TS-CLMP
(Clamp, actuator kit
for thompson)
250024
(Spacer, 5.0 Hub
Elevation)
295046
(SPACER, .44)
TS36BRC
(Thompson actuator 36”)
22433
(Hub, 2.4 motorized)
295047G
(Assem, 1.8m nav
Yoke Galv.)
2.
Attach 22433 (Hub, 2.4 motorized) to 295047G (Assem, 1.8m nav Yoke Galv.) to yoke as
pictured below. (This will require two people to lift Hub Assem into place use pre attached
shoulder bolts in Yoke assem)
3.
Using TS-CLMP ( Clamp, actuator kit for thompson) hardware and spacers (250024
( Spacer, 5.0 Hub Elevation)) that were removed earlier, attach TS36BRC (Thompson
actuator 36”) to 22433 (Hub, 2.4 motorized) as pictured below.
4. Using 295046 (SPACER, .44) and matching hardware, attach TS36BRC to 295047G (Assem
1.8m nav Yoke Galv.) as pictured below.
NOTE
: For ease of panel and radial beam assembly, make sure hub is orentated as pictured.
Reflector Assembly (continued)
TS-CLMP
(Clamp, actuator kit
for thompson)
250024
(Spacer, 5.0 Hub
Elevation)
295046
(SPACER, .44)
TS36BRC
(Thompson actuator 36”)
22433
(Hub, 2.4 motorized)
295047G
(Assem, 1.8m nav
Yoke Galv.)
