background image

Collar Fitting

Find the Best Vibration Level for Your Pet

Product Specification

Device Information

8

Please fit the collar properly so that the collar presses firmly against the dog’s 
skin. When properly fitted, you should be able to put a finger in between the 

Receiver Collar and the dog’s neck.

Too loose:

 The Receiver Collar will move around the dog’s neck, the vibration 

mode may not be able to work effectively.

Too tight:

 It may cause dog to breathe hard. 

The unit comes with Up and Down buttons to control the Vibration Level, with 
Level 1 being the lowest level and Level 8 being the highest. The  level of 
Vibration best suited for your dog depends on your dog’s temperament and 
threshold for Vibration. Always start at the lowest level and work your way up. 
The appropriate level can be found when the dog responds to the Vibration with 

a mild reaction, such as a flick of the ear, a lick of the lips, a tensing of the neck 

muscles etc. The Vibration Level may vary depending on the training situation.
When highly distracted, dogs will require a higher level of Vibration.

Caution:

 1.Do not shave the pet’s neck as this 

may increase the risk of skin irritation.
2.The collar should not be worn for more than 
12 hours per day or it may cause skin irritation.

Battery Type

Rechargeable, lithium polymer battery

Battery Life(typical use)

Remote Waterproof Rating
Receiver Waterproof Rating
Operating temperature range
Wireless Power
Wireless Range

Remote: 27 days
Receiver: 11 days
Non-Waterproof(Keep away from water)
IEC 60529 IPX7, waterproof
From 0-40 °C  (from 32-104 °F)
20dBm(100mW)
300m(984 feet)

Содержание p-collar 651















Отзывы: