Patpet p-collar 651, Быстрый старт

Страница: 5 / 14

Turn on the Receiver Collar
Turn off the Receiver Collar
Function Test
NOTE:
Prepare the Remote
Turn ON/OFF the Remote
Please use the Output: DC 5V 500-800mA charger to charge the product.
Don’t use a charger that does not meet the specifications to charge the
product.
1. Press and hold the ON/OFF button to turn the remote ON.
2. LCD will be lighted, and shows the information of current channel,
battery power and levels. If not, please charge the remote.
3. Press and hold the ON/OFF button to turn the remote OFF.
Press the On/Off Button until the Green LED light comes on.
In normal mode, the Green LED will flash every 4 seconds, indicating
the Receiver Collar is on and ready to receive a signal from the Remote.
Press and hold the On/Off Button until the Red LED light shuts off
(This takes approximately 3 seconds). Release the
On/Off Button.
To extend the life of the batteries, please turn the Receiver Collar off when it is
not in use.
NOTE:
We recommend you experience firsthand how the different levels feel on yourself.
Please always starts at the lowest level and work your way up to your personal
comfortable levels.
1. Place the collar receiver on your hand or your leg.
2. Hold your remote approximately 2 ft. from the training collar. Press the Vibration
Button continuously for 1 to 2 seconds. You should feel continuous vibration.
3. Starting at level 1, press the Vibration Button.
4. Increase the level until the sensation begins to feel uncomfortable.
5