Patpet p-collar 651, Быстрый старт

Страница: 4 / 14

Setting Up the Product
Before you can use the Dog Training Collar, you must set
up the product using the steps below:
1. Charge the Remote and the Receiver Collar.
2. Prepare the Remote and turn it on.
3. Prepare the Receiver Collar and turn it on.
4. Test button functions before putting it on dog.
5. Test Vibration function.
6. Pair the Remote and the Receiver Collar, pair them when the product loses its
code or pairs with a second collar.
Charging the Remote and the Receiver Collar
1. Plug in and fully charge the Remote and the Receiver collar.
For the initial charge,be sure to charge it for 4 hours.
Subsequent charges only take 2-3 hours.
2. When fully charged, the red LED on the Receiver Collar will become green.
The Battery Display of the Remote will stop cycling and become steady.
Tips: 1. Excessive charging will shorten battery life. Only charge them when
batteries are low.
4
2. When you’re not using the collar, please turn it off to increase
the battery life.