16
17
Charging the unit
The unit uses Lithium-Polymer batteries.
1. Charge the unit before using the unit for the first time.
2. Do not charge the unit near any flammable
substances.
3. Fully charge if the unit is to be stored without use for
a period of 3 months or more.
Receiver Collar Function
Normal operation
- Low battery
Red LED Response
On for 3 seconds
Fl
ashe
s
rapidlly
On length of
VIBRA
/
SHOCK
button press
On length of
charging
within
2
-
3
hours
Power off
Vibration/
Shock
Charging
Step
8
Recharge the unit if:
The indicator light on the collar is emitting a red color
and flashes rapidly.
The 3 bar indicator on the Transmitter LCD shows just
1 bar.
Normal operation
- Good battery
Charging
Complete
Receiver Collar Function
Green LED Response
Flashes once
1
fl
ash every 5 seconds
On length of
TONE
button press
Flashes
once
every second
within
1
5
seconds
Flashes
rapidly
for
five
times
On length of the charger connected
Power on
Training tone
In p
airing
position
Pairing
Complete
Receiver Indicator Light – Function and Response
2. Lift the rubber covers protecting the Transmitter/Receiver
Receiver Collar Charging Jack, and as shown below.
while charging and green light turned on when fully charged.
Note: The Battery Indicator on the Transmitter will scroll and
the indicator light in steady red while charging; and the Battery
1. Plug the charger into a standard wall outlet.
Collar Charging Jack.
3. Connect the charger connectors to the Transmitter and
4. Connect the USB port to the Charging Adapter.
6. When charging is completed, remove the charger connector.
take only 2-3 hours.
flashes when fully charged.
5. Charge the unit for 4 hours for the first charge. Recharges
Indicator will become steady, and the LED Indicator Light
The indicator light on the Receiver Collar will be in steady red
Battery Charging Procedure
NOTE: The unit has a partial charge when it leaves our facility,
upon receipt of the collar, be sure to give it a 4-hour initial charge
before the first use.
The indicator light on the Transmitter or Receiver will not come on.
The indicator light on the Transmitter or Receiver comes on
momentarily when any of the Mode Buttons is pushed.
