18
19
How to use the Test Light
1. Turn the Receiver Collar on.
2. Hold the Test Light Contacts to the Contact
Points.
3. Press the SHOCK Button on the Remote
Transmitter.
will flash brighter.
the Receiver and re-test. If Test Light still does
4. The Test Light will flash.
not flash, contact us for Customer Service.
Note: At higher Shock Levels, the Test Light
Save the Test Light for future testing.
Note: If the Test Light does not flash, recharge
5. Turn the Receiver Collar off.
Step
10
Step
9
How
to pair the Remote
Transmitter & Receiver Collar
If your Receiver Collar does not beep when the TONE
Button of the Remote Transmitter is pushed,or if you
feel the Receiver Collar is not responding to the Remote
Transmitter, follow these steps to pair:
Two Dog System
NOTE: If you wish to add another Receiver Collar to
Dog 1/2 Button.
2. Turn on the Receiver Collar for Dog 2, press any
where you bought your unit.
Remote Transmitter
1. Switch Dog1 to Dog2 by pressing and releasing the
the training system, extra Receiver Collars are available
Mode Buttons to verify function.
3. If Dog 2 Receiver Collar does not respond. Pairing
Transmitter & Receiver Collar above.
may be needed.Repeat steps in How to pair the Remote
2.
Press any of on the transmitter,
the Green LED Light on the Receiver Collar flashes
rapidly for 5 times
which means pairing is completed.
1. With the Receiver Collar off your pet, turn the
Receiver Collar off. Restart, press and hold the On/Off
Button until the Green LED flashes every second on
the Receiver Collar.
