Paton StandardMIG-160, Руководство пользователя

Страница: 71 / 102

PATON StandardMIG DC MMA/TIG/MIG/MAG
- 70 -
ENGLISH
CONTENTS
1. General provisions 72
2. Commissioning 75
2.1 Intended use 75
2.2 Placement requirements 75
2.3 Mains connection 76
2.4 Connection of the mains plug 76
3. Manual arc welding with a stick electrode (MMA) 77
3.1 Welding process cycle - MMA 77
3.2 HOT-START function 77
3.3 ARC-FORCE function 78
3.4 ANTI-STICK function 79
3.5 Slope control function of the voltammetric characteristic 79
3.6 Short arc welding function 80
3.7 No-loading voltage reduction unit function 80
3.8 Pulsed current welding function 80
4. Tungsten-arc inert-gas welding (TIG) 81
4.1 Welding process cycle – TIG-LIFT 82
4.2 TIG-LIFT arc ignition function 82
4.3 Welding current ramp function 83
4.4 Pulsed current welding function 83
5. Semi-automatic welding (MIG/MAG) 84
5.1 Welding process cycle - MIG/MAG - 2T 86
5.1.1 Button function on the torch - 2T 86
5.2 Welding process cycle - MIG/MAG - 4T 87
5.2.1 Button function on the torch - 4T and alt . 4Т 87
5.3 Inductance function 88
5.4 Pre-purge function with safety gas 88
5.5 Post-purge function with safety gas 88
5.6 Voltage/speed ramp function at the start of welding 88
5.7 End-of-welding voltage/speed decay function 89
5.8 Pulsed voltage welding function 89
5.9 Motor switch-off function 90
6. Selecting and configuring machine functions 90
6.1 Switching to the required function 91
6.2 Switching to the required welding mode 91
6.3 Resetting all functions of the current welding mode 91
6.4 Changing the program number in the current welding mode 91
7. General list and sequence of functions 92
8. Generator operation mode 94
9. Service and maintenance 95
10. Storage regulations 95
11. Transportation 95
12. Scope of delivery 95
13. Safety instructions 96
14. Warranty obligations 100