PATON
MultiPRO
DC MMA/TIG/MIG/MAG
-16 -
1
–
Digital display;
2
–
Buttons for adjusting the selected parameter to decrease and increase (by default: MMA
–
welding current, TIG
–
welding current, MIG/
MAG
–
welding voltage);
3
–
Source function selection button in the used welding mode;
4
–
Welding mode selection button:
a) manual metal arc welding, MMA;
b) tungsten-arc inert-gas welding, TIG;
c) metal-arc inert-gas welding/metal active gas welding, MIG/MAG;
5
–
Machine overheating indicator: normal
–
OFF, when overheated
–
flashes;
6
–
Wire threading button (no gas is supplied);
7
–
Digital display of the wire feeder;
8
–
Torch button mode indicators (mode 2t/4t/alt.4T);
9
–
Button for selecting functions of the wire feeder;
10
–
Button for testing shielding gas supply (wire is not fed);
11
–
Buttons for decreasing and increasing parameters (by default: wire feed speed);
12
–
EURO type KZ-2 connector for connecting a semi-automatic torch;
13
–
Power supply plug to the wire feeder;
14
–
Connector for controlling torch buttons (TIG welding);
15
–
Socket for shielding gas supply to the torch (TIG welding);
16
–
Protective cover lock;
17
–
Lifting protective cover for wire feeder compartment;
18
–
Inlet for threading a welding wire;
19
–
Shielding gas connection (MIG/MAG welding).
20
–
Connector for the control cable from the wire feeder;
21
–
Breaker/button for turning on/off the machine;
22
–
Wire coil holder with spring-loaded braking device;
23
–
Connection for shielding gas supply from a gas cylinder (TIG welding);
24
–
Wire feeder and gas heater fuses;
25
–
Location for connecting the grounding cable;
26
–
Socket for 36V gas heater;
А
–
Bayonet-type power current socket "+":
a) MMA welding
–
the electrode cable is connected (in more rare cases, when using special electrodes, the ground cable is connected);
b) TIG welding
–
only the ground cable is connected;
c) MIG/MAG welding with solid wire
–
the cable is connected to the feeder from inside (by default);
d) MIG/MAG welding with flux-cored wire
–
the ground cable is connected;
B
–
Bayonet-type power current socket "-":
a) MMA welding
–
the ground cable is connected (in more rare cases, when using special electrodes, the electrode cable is connected);
b) TIG welding
–
only the TIG torch is connected;
c) MIG/MAG welding with solid wire
–
the ground cable is connected;
d) MIG/MAG welding with flux-cored wire
–
the cable is connected to the feeder from the inside (it is possible to connect it yourself);
START-UP
The welding unit is designed exclusively for MMA welding, tungsten-arc inert-gas (TIG) welding, as well as metal-arc inert-gas