19
TYPE
SZP-102/SZP-103/SZP-104
①
Install the Pole to the NPT Bracket.
Tighten tightly !
□
3-screw Mounting Type
①
Take out the wiring.
②
If using a Rubber Gasket (SZW-102 / SZW-103),
waterproofing is required.
(
Refer to “Product Attachment (page 17)” for
mounting instructions for the Rubber Gasket.
)
③
Insert the bolts of the beacon into the mounting holes of t
ihe NPT Bracket.
④
Use the nuts (accessory) to secure
the mounting surface of the NPT Bracket.
①
Using the mounting holes on the NPT Bracket, secure
the Mounting Bracket and Waterproof Sheet with screws and nuts.
(Installation screws are not included with this product.
Binding head screws or pan head screws are recommended.)
②
Take out the wiring.
③
Check that the O-ring is not twisted.
④
Align the indicators of the Base and the body of the beacon,
then twist clockwise to lock in place.
( Check the INSTRUCTION MANUAL for the lock state )
3 - point Hole Leg Mounting Type
Pole Installation
Product Attachment
External Thread
Model
SZK-102
SZK-104
SZK-103
1/2 NPT
3/4 NPT
1/2 NPT
External Thread
3-screw Mounting Type
④
③
②
2 - point Hole Leg Mounting Type
①
③
④
Waterproof Sheet
Mounting bracket
O Ring
Rubber Gasket
Model
SF08/SL08/SKS
SF10/SL10/SKH
SL15/SKP
Nut
Recommended
Torque
M4
M5
M8
0.7 N•m
1.4 N•m
6.0 N•m
Model
SF08/SL08
SF10/SL10
SL15
0.7 N•m
1.4 N•m
6.0 N•m
M4
M5
M8
Recommended
Torque
□
2 - point Hole Leg Mounting Type
Screw
①
②
①
