18
Model
Recommend
Torque
Recommend
Screw
Nut
Recommend
Torque
Model
TYPE
SZP-101
①
Install the Pole Waterproof Ring to the bottom of the Upper Bracket.
Check that the 2 ribs are on the outside.
②
Insert the Pole into the Upper Bracket. Refer to the figure on the right.
(
The Pole is sold separately.
)
③
Tighten the Binding Head Tapping Screws (2 pcs.) from
the topside of the Upper Bracket.
□
3-screw Mounting Type
SF10/SL10/SKH
M5
1.4 N
･
m
①
Wire the product as shown on the right.
②
When use a Rubber Gasket (SZW-103),
waterproofing is required.
(
Refer to “Product Attachment (page 17)” for
the mounting method of the Rubber Gasket.
)
③
Insert the product bolt into the mounting hole of the Upper Bracket.
④
Use the nuts and washer (accessory) to secure the product.
※
The Waterproof Sheet is not required.( Accessory of Upper Bracket )
①
Wire the product as shown on the right.
②
Using the mounting holes on the Upper Bracket, secure
the Mounting Bracket and Waterproof Sheet with screws and nuts.
(Installation screws and nuts are not included with this product.
)
③
Check that the O-ring is not twisted.
④
Align the indicators of the Mounting Bracket and the body of the beacon,
then twist clockwise to lock in place.
(Read the applicable instruction manual for the locked state.)
□
2-point Hole Type Mounting
3-screw Mounting Type
2-point Hole Type Mounting
Pole Waterproof Ring
Pole
Rubber Gasket
Waterproof Sheet
(
for Beacon
)
Waterproof Sheet
(
for Upper Bracket
)
③
①
②
④
③
②
②
③
④
Mounting Bracket
O-ring
①
①
1.4 N
･
m
M5×20mm
SF10/SL10/SKH
Screw
Recommend
Torque
3×12mm
0.8 N
･
m
Product Attachment
Pole Attachment
Upper Bracket
