13
Recommend
Torque
Model
Model
Recommend
Torque
Recommend
Screw
Recommend
Torque
Screw / Nut
■
Mounting Dimensional Drawing
［
Unit
：
mm
］
TYPE
SZK-102
2-point Hole Type Mounting
3-screw Mounting Type
38
70
3
Mounting Hole
Wiring Hole
22
①
Attach the Wall Mount Bracket to the wall, referring to
the dimensions in the Mounting Dimensional Drawing below.
(Screws are not included. Please prepare separately.)
②
Insert the product bolt into the mounting hole of the Wall Mount Bracket.
③
Use the nuts and washer (accessory) to secure the product.
□
3-screw Mounting Type
①
Attach the Wall Mount Bracket to the wall, referring to
the dimensions in the Mounting Dimensional Drawing below.
(Screws are not included. Please prepare separately.)
②
Using the mounting holes on the Wall Mount Bracket, secure
the Mounting Bracket and Waterproof Sheet with screws and nuts.
(Installation screws and nuts are not included with this product. )
③
Check that the O-ring is not twisted.
④
Align the indicators of the Mounting Bracket and the body of the beacon,
then twist clockwise to lock in place.
(Read the applicable instruction manual for the locked state.)
□
2-point Hole Type Mounting
③
②
Waterproof Sheet
Mounting Bracket
O-ring
●
When using the Wall Mount Bracket (SZK-102) with a Rubber Gasket (SZW-102/SZW-103), the protection rating is IP23.
●
If the rated voltage of the product to be installed exceeds 100V AC, use the Wall Mount Bracket Cover (SZK-104).
SF08/SL08
SF10/SL10
0.7 N
･
m
1.4 N
･
m
M4×20mm
M5×20mm
SF08/SL08/SKS
SF10/SL10/SKH
M4
M5
0.7 N
･
m
1.4 N
･
m
1.4 N
･
m
M5
②
③
④
15
4
-
6
Caution
Product Attachment
Nut
