11
Installation
3
Notice
● Ensure that the product is installed in an environment that meets the following conditions:
- Where
excessive vibration
is not present.
- On
a sturdy surface.
- On
a level surface.
●
When installing this product in an environment where waterproofing is required,
be sure to properly waterproof the exposed nuts and bolts.
●
Before use, be sure to read this manual as well as the instruction manual for the compatible PATLITE beacon.
TYPE
SZK-101
□
For Product Mounting Holes
Place the mounting bracket on a flat surface, with the bottom side up. Drill the holes from the bottom side.
□
For Cable Gland
Drill a 16 hole from the top surface.
Cable gland Mounting Hole
Product Mounting Hole (2 holes)
(SF10-KT/SL10-KT)
Product Mounting Hole (3 holes)
(SF10-J/SL10-J/SKH)
Drill
Model
SF08-KT/SL08-KT
SF10-KT/SL10-KT
SF08-J/SL08-J/SKS
SF10-J/SL10-J/SKH
Number of Holes
2
2
3
3
Connect a commercially available cable gland
from the bottom of the Wall Mount Bracket.
Install and fix in place
with nuts from above.
Cable gland Installation
Product Mounting with Knock-outs
●
If using a cable gland, be sure that you are using it for the cable type beacons.
●
Do not open unused mounting holes. If it is accidentally opened, be sure to waterproof the opening.
●
Be sure to deburr after drilling.
●
A cable gland with a mounting screw size of M16 x 20mm or less and cable size of 7 to 8mm is recommended.
Caution
5mm
6mm
5mm
6mm
