5
3.
4.
5.
6.
7.
8.
9.
10.
Completely open LP cylinder valve by turning the hand wheel counterclockwise. If you hear a rushing
sound, turn the gas off immediately. There is a major leak at the connection. Correct before proceeding.
Brush the soapy solution onto all metal seams and the entire valve area.
Slowly turn LP cylinder valve counterclockwise to the open position.
A leak is identified by a flow of bubbles from the area of the leak. Close LP cylinder valve immediately and
retighten connections.
If leaks cannot be stopped, do not try to repair them, contact your dealer for assistance. Do not attempt to
operate the appliance if a leak is present.
Always examine the hose for any damage. If damage is observed, do not attempt to patch the hose.
Replacing the hose is the only safe option.
For assistance with any malfunction related to LP cylinder, regulator or hose, contact customer service.
Always close LP cylinder valve after performing the leak test by turning the hand wheel clockwise.
1.
2.
3.
4.
5.
6.
1.
2.
Open the lid before lighting.
Turn the control knob to OFF position.
Turn the gas supply on at LP cylinder valve or the regulator.
Push the control knob and turn it anti-clockwise to the HI position. Push and hold the ignitor button to light
the burner.
If the burner does not ignite, turn the control knob to OFF position, and wait for 5 minutes before attempting
to relight the burner.
If the burner ignites, turn the control knob to the temperature setting required.
UNDER NO CIRCUMSTANCE SHOULD THE VALVE REMAIN IN THE ON POSITION FOR MORE THAN 12
SECONDS.
LIGHTING THE BURNER USING ELECTRONIC IGNITION
Turn off the gas supply at LP cylinder by turning the valve clockwise to a full stop.
Turn the burner control knob to OFF position.
TURNING OFF YOUR APPLIANCE
* Should the burner still fail to ignite, check the gas supply.
