It is possible for light sources behind the camera to reflect o
ff
of the eGlass surface back into the camera.
These bright spots can be distracting and even make the glowing ink hard to see. For best results:
1)
Positioning
: Do not position eGlass opposite of light sources that can reflect o
ff
of the glass (ceiling
light fixtures, windows, etc.). Try repositioning eGlass by turning it away from potential light sources.
2)
Eliminate
light sources at the source by closing curtains, powering-o
ff
lights, etc.
3)
Lower Exposure
(-) to reduce the intensity of reflections
4)
Hood
: Use the Anti-Reflection Hood to fully eliminate reflections
Other Bright
Lights
Windows
Eliminating Reflections
2
1
3
10
4
5
6
7
8
9
11
Antireflection Hood
The included Antireflection Hood can be assembled and attached to the eGlass frame to block out any
reflections coming from the backside (camera side) of eGlass.
Please note: Because the Antireflection Hood decreases visibility through the glass during
face-to-face
instruction
, try the other reflection elimination methods before using this solution when teaching face-to-face.
19
20
18
19
20
1. Insert the 4x
Rods
into the 2x
Brackets
2. Slide the
Hood
onto the 4x Rods,
ensuring each rod slides into the small pockets
18
18
