PASI WMS-LTC, Руководство пользователя

Страница: 15 / 15

WMS-LTC 13
Take a measurement
6. Take a measurement
The use of the WMS-LTC instrument is very easy.
After switching on the instrument, the conductivity, temperature and level can be read.
The probe has a certain thermal inertia and to obtain an accurate reading of conductivity
and temperature it is necessary to leave the probe immersed for at least 5 minutes.
For an accurate reading of the level, conductivity and temperature, it is recommended to
proceed as follows:

Unwind the cable until the level is reached;

Wind the cable slowly by pulling the probe out of the water, wait for the sound
signal and for the LED to go off – these signals mean “exit from the water”;

Lower the probe very slowly again until the water level is reached.

Read the depth measurement on the cable.

Leave the probe immersed for more than 5 minutes to achieve thermal
equilibrium.

Read conductivity and temperature on the display.