Release date: 24.07.18
rev 1.0 18
7 / 9
BEFORE STARTING INSTALLATION, PLEASE ENABLE THE PARKING SENSOR FUNCTION ON THE VEHICLE
BY USING OFFICAL PEUGEOT DISGNOSTIC TOOL.
PEUGEOT
The harness supplied with PARKVIEW is split in 2 sec"ons, the first is composed by 4 wires to connect on the radio compartment of the vehicle.
Connect:
YELLOW to the +12vdc posi"ve
BLACK to the GND nega"ve
GREEN to the CAN H
WHITE to the CAN L
Once made the calibra"on connect the connector A in the connector of the parking sensors as above described.
Do not connect the BUZZER of the parking sensors, original sound is maintained. To power the parking sensors please connect it to the reverse lamp.
Once the connec"on are done the system is immediately ready to work, each "me the canbus line will wake up the LED of PARKVIEW will light GREEN to
indicate the correct behaviour of the module. Then by inser"ng the reverse parking sensors will ac"vate, consequently PARKVIEW will ac"vate the visualizing
on the OEM radio. With some radio MUTE is managed directly by the radio. By removing the back gear the visualizing will be interrupted.
By switching on the parking sensors, Parkview led will generate some red/green flashes confirming the right working.
R 1 3 5
2 4 6
R 1 3 5
2 4 6
CAR
YEAR
RADIO COMPATIBLE
PEUGEOT
508
from 2012
OEM
208
from 2012
OEM
3008
from 2013
OEM
PARKVIEW CF0006UNPS51
CANBUS MODULE TO VIZUALIZE PDC ON CAR DISPLAY
COBRA PS 0158
INSTALLATION MANUAL
45’
CONNECTIONS
CAN H
CAN L
GND
12 VDC
Once the calibra"on has been performed,
disconnect the BUZZER and connect connector
A: the system is now ready to operate.
BUZ 4 3 2 1
A
A er making the connec"ons, connect the
Parking Sensor KIT BUZZER and the PARKVIEW
wiring connector B and calibrate the Cobra
system as usual.
BUZ 4 3 2 1
B
A
