Attach an End Stop to a Dynamics Track
The Adjustable End Stop is designed to be mounted to the end of a dynamics track to
stop dynamics carts from rolling off the end of the track.
Figure 1. Installing the End Stop to a Dynamics Track.
1. Position the End Stop so that magnets on the End Stop face the track.
2. Insert the square nut and tab on the End Stop into the T-slot of the track.
3. Move the End Stop to the desired position then turn the thumbscrew to secure the
end stop to the track.
Mount a Smart Cart to a Rod
The Smart Cart Rod Stand Adapter allows the PASCO Smart Cart to be suspended from
a rod to use its force sensor to measure forces. The adapter contains two holes that are
perpendicular to each other that allows the Smart Cart to be mounted vertically or
horizontally.
Figure 2. Two ways to mount the Smart Cart to a support rod using the Smart Cart Rod Stand
Adapter.
Product Guide | 012-16827A
5
