Using the Angle Indicator
The Angle Indicator is used for measuring angles from 0 to 90° in two directions and can
attach to lab equipment in a variety of ways.
Attach to a Dynamics Track
Figure 6. Inserting an Angle Indicator into the T-slot of a Dynamics Track.
1. Insert the square nut on the Angle Indicator into the T-slot of the track.
2. Move the Angle Indicator to the desired position on the track.
emoji_objects
TIP:
When a Motion Sensor is attached to the end of the track, place the
Angle Indicator as close to the sensor as possible. This will help prevent the
indicator from interfering with measurements made by the Motion Sensor.
3. Turn the thumbscrew to secure the Angle Indicator to the track.
Attach to a Dynamics Cart
Figure 7. Inserting an Angle Indicator into the slot of a Dynamics Cart.
Attach the Angle Indicator to a Dynamics Cart by inserting the indicator into the slots on
top of the cart.
Product Guide | 012-16827A
9