www.pasco.com
Using the sensor for the first time
The following instructions are intended for SPARKvue users. If you are using PASCO Capstone, follow the instructions on
the opposite side of this page.
Before using the sensor in the classroom, do the following: (1) charge the battery, (2) install the latest version of SPARKvue,
(3) update the sensor firmware. Installing the latest version of SPARKvue and sensor firmware is necessary to have access
to the latest features and bug fixes. Detailed instructions for each procedure are provided below.
Update the sensor firmware
Sensor firmware is installed using SPARKvue. You must install the latest version of SPARKvue in order to have access to
the latest version of the sensor firmware. When you connect the sensor to SPARKvue, you will automatically be notified if
a firmware update is available. Click Yes to update the firmware when prompted. If you do not receive a notification, the
firmware is up to date.
Tip
: Connect the sensor using USB for a faster firmware update.
Charge the battery
The sensor contains a rechargeable battery. A fully
charged battery will last an entire school day. To charge
the battery:
1. Connect the USB cable to the USB port located on
the sensor.
2. Connect the other end of the cable to a USB charger.
3. Connect the USB charger to a power outlet.
As the device is charging, the battery indicator light will be
yellow. The device is fully charged when the light is green.
Install the latest version of SPARKvue
Follow the instructions below for your device to download
and install the latest version of SPARKvue.
Windows and macOS
Go to www.pasco.com/downloads/sparkvue then click
Download Update.
iOS and Android
Search for SPARKvue in the App Store (iOS) or Google
Play Store (Android).
Chromebook
Search for SPARKvue in the Chrome Web Store.
Connect the sensor to SPARKvue
The sensor can be connected to SPARKvue using a USB
or Bluetooth connection.
Note
: Connecting using USB is not available with iOS
devices and some Android devices.
To connect using USB:
1. Connect the USB cable to the USB port of the sensor.
2. Connect the other end of the cable to your device.
3. Open SPARKvue.
To connect using Bluetooth:
1. Turn on the sensor by pressing and holding the power
button for one second.
2. Open SPARKvue.
3. Select Sensor Data.
4. Select the wireless sensor that matches the ID
labeled on your sensor.
