Clearing Overloads
If your PAS Vr. is overloaded, it will take a few minutes to recover. Here is the
procedure for rapid fuel cell recovery:
[
1] PAS Sensor Off/Power On
Turn off the sensor by tapping and releasing the
black sensor switch button but leave the power
switch “ON” to speed recovery.
[2] Check in 5 Minutes
After 5 minutes, turn the sensor back on and check
the PAS Vr. with an alcohol-free air sample. If bars
still light up in the display within approximately 20
seconds, repeat steps 1 and 2 as necessary until the
overload has been completely cleared.
[3] PAS Off
Turn off the sensor. Your unit is now cleared and
ready for use.
14
