Parweld XTM182i, Руководство оператора

Страница: 6 / 20

www.parweld.com
6
3.0 technical
Specifications
The XTM 182i, Is a compact type machines with integrated wire
feed units for use with single phase 230V supply. The machine
uses inverter technology to allow MIG , TIG and MMA welding to be
performed.
Feature XtM182i
Input voltage 230V +/-10%
Hz 50/60
phases 1
Wire drive 4 roll
Current Draw (a) 26
rated input
capacitance KVa
7.4
No-load voltage
V
69V
Rated working
voltage V
23
LIFT Arc welding
current a
15-180
MMA welding current 20-160
MIG welding current
a
30-180
Fuse Rating
(a)
32
Output current (a) 35-185
4.0 Description of Controls
1. POWER INDICATOR: When the machine is turned on, the
power indicator will be on.
2. ALARM INDICATOR: When the thermal indicator is on, it shows
the machine is overloaded and the internal temperature is too
high. Weld output will turn off automatically but the fan will still
be working. When the internal temperature is decreased, the
overload light will turn off and the machine will be ready to weld
3. VRD INDICATOR: When the VRD indicator is on, it means
the welder’s output voltage is safe ≤13V, it will be off when the
welder is working..
4. CURRENT DISPLAY INDICATOR: It will be display current
preset, and display real-current when the welder is working.
5. LEFT ADJUST KNOB: Its main function is adjusting welding
current; Users can press down the knob in MIG/MAG then wire
inching function will be activated.
6. VOLTAGE DISPLAY INDICATOR: It will be display Arc-Force
preset in MMA, and display voltage preset in MIG/MAG, and
display real-voltage when the welder is working.
7. MIDDLE ADJUST KNOB: Its main function is adjusting Arc-
Force in MMA, and adjusting welding voltage in MIG/MAG.
Press down the knob in MIG/MAG, and the gas-check function
will be active.
8. VOLTAGE AND ARC LENGTH INDICATOR:
9. MMA ARCFORCE PRE-SET INDICATOR:
10. MIG/MAG ELECTRICAL INDUCTOR ADJUST KNOB: Its main
function is adjusting arc’s dynamic in MIG/MAG.
11. CURRENT INDICATOR: When the indicator is on, it means the
current is displayed.
12. WFS INDICATOR: When the indicator is on ,it means the wire
speed is display(m/min).
13. WELD FUNTION SELECTION BUTTON: Users can select
MMA LIFT Arc or MIG/MAG function by this button, and the
indicators at the left part of button will indicate the selection
weld function.
14. MIG/MAG TRIGGER MODE BUTTON: Users can select gun
trigger mode in MIG/MAG by this button, and the indicators at
the left part of button will indicate the selection mode.
15. MIG/MAG GAS SELECTION BUTTON: Users can select
protect gas by this button, and the indicators at the left part of
button will indicate the selection gas.
16. MIG/MIG WIRE DIAMETER SELECTION BUTTON: Users can
select wire diameter by this button, and the indicators at the left
part of button will indicate the selection wire.
17. Torch connector The Euro connector provided the external
connection for the welding torch.
18. Work return lead connection. This socket allows connection of
the work return lead to the front of the machine.
19. Gas cylinder restraint chain Use to secure the gas cylinder
when mounted on the rear of the machine
20. Shielding gas input connection 3/8 BSP male connection for the
shielding gas input.
21. Mains input connection Input connection for the pre installed
mains cable.
22. Cylinder stand Rear stand for the gas cylinder
23. Wire spool holder
24. Pressure adjuster Used to adjust the pressure allied by the feed
rollers on the welding wire.
3
6
9
10
7
16
2
1
11
12
4
5
13
14
15