Partners SurfRAID TRITON Mini, Руководство пользователя

Страница: 29 / 93

Getting Started
2-6
2.3 Connecting to Host
The SurfRAID TRITON Mini supports the Ultra 320 SCSI LVD interface which
provides fast 320MB/S data transfer rates using a 16-bit SCSI bus. Installa-
tion of the SurfRAID TRITON Mini is very similar to the installation of a stan-
dard SCSI drive. The SCSI connector accepts the standard 68-pin LVD SCSI
connector used on most LVD SCSI devices. Refer to your system and/or
SCSI host adapter manual for additional installation procedures that may ap-
ply to your system or host adapter.
1. Connect at the rear of the SurfRAID TRITON Mini, attach one end of the
external SCSI cable to one of the SCSI connectors and the other end to
the host adapter’s external SCSI connector. (The host adapter is in-
stalled in your server)
Note:
1.
When one or more SCSI devices are connected, the total length
of all cables (internal or external) must not exceed 3 meters (9.8
ft.) to ensure reliable operation.
2. For safety reasons, make sure that both the SurfRAID TRITON
Mini and the server are turned off when you plug-in the SCSI cable.
Host A in