Partlow MRC 7700, Руководство по установке и эксплуатации

Страница: 33 / 88

P
AGE
33
DISPLAY AVAILABLE FACTORY YOUR
STEP DESCRIPTION CODE SETTINGS SETTING SETTING
28 Display Filter Factor dFF 1 to 20 1
1= no averaging
(number of scans averaged)
29 Process Filter Factor PFF Same selection as dFF 1
30 Process Value Output Pout 0=Not selected 0
Retransmission 1=Selected
(If Pout =0 then Pou and
PoL will not display)
31 Process Output Pou -9999 to 9999 2000
Upper Value
32 Process Output PoL -9999 to 9999 0
Lower Value
33 Chart Range Cru -9999 to 9999 100
Upper Value
34 Chart Range CrL -9999 to 9999 0
Lower Value
35 Proportional * P1EC 0 to 100% 0
Output 1 Action
on Error Condition
(If out1= 0,1,2 then
P1EC will not be seen)
36 Proportional * P2EC 0 to 100% 0
Output 2 Action
on Error Condition
(If out2 = 0,1,2,7 then
P2EC will not be seen)
37 Pen Action on PAEC 0 or 1 1
Error Condition 0 = Pen goes to 0 % of chart
1 = Pen goes to 100 % of chart
* NOT AVAILABLE ON RECORDER ONLY INSTRUMENTS
Pressing the SCROLL key with the PAEC parameter value displayed in the Pen 1 window will
advance the display of a single pen instrument to the unit parameters. Pressing the SCROLL
key with the PAEC parameter displayed in the Pen 1 window of a two pen instrument will
advance the display to be PEns in the Pen 2 window. The Pen 2 Program mode parameter
selections can be made now. Pressing the SCROLL key with the PAEC parameter value
displayed in the Pen 2 window will cause the display to advance to the unit parameters.
Unit Parameters
38 Relay A assignment rLyA 0 to 14 * 0
0=Not assigned *
1=Assigned to Alarm 1-Pen 1 *
2=Assigned to Alarm 2-Pen 1 *
3=Assigned to Alarm 1-Pen 2 *
4=Assigned to Alarm 2-Pen 2 *
5=Assigned to Output 1-Pen 1
6=Assigned to Output 2-Pen 1
7=Assigned to Output 1-Pen 2
8=Assigned to Output 2-Pen 2
9=Assigned to Event 1
10=Assigned to Event 2
* Recoredr Only