Partlow MRC 7700, Руководство по установке и эксплуатации

Страница: 31 / 88

P
AGE
31
DISPLAY AVAILABLE FACTORY YOUR
STEP DESCRIPTION CODE SETTINGS SETTING SETTING
12=B T/ C degrees C
13=B T/C degrees F
14=N T/ C degrees C
15=N T/C degrees F
16=C T/ C degrees C
17=C T/C degrees F
20=RTD degrees C
21=RTD degrees F
30=0 to 5 VDC/0 to 20mA
31=1 to 5 VDC/4 to 20mA
4 Input Correction for TB 5 iCi2 -300.0 to +300.0 degrees 0.0
-9999 to +9999 units
5 Pen Select PEnS 1=Dry Bulb Temperature Pen 1=1
2=Wet Bulb Temperature Pen 2=2
3=Relative Humidity (if Provided)
6 Relative Humidity rHC -10 to +10% 0
correction (PEns=3)
7 Output 1 * out1 0=None 0
1=On-Off- Direct
2=On-Off- Reverse
3=Time Proportioning- Direct
4=Time Proportioning -Reverse
5=Current Proportioning -Direct
6=Current Proportioning -Reverse
7=Position Proportioning (open)
8 Output 1 Percent * o1uL 0 to 100 percent 100
Upper Limit (o1uLand
o1LL will not be seen if
out1 = 0,1,2)
9 Output 1 Percent * o1LL 0 to 100 percent 0
Lower Limit
10 Output 2 * out2 0=None (PositionProportioning 0
Direct Closed)
1=On-Off- Direct
2=On-Off- Reverse
3=Time Proportioning- Direct
4=Time Proportioning-Reverse
5=Current Proportioning- Direct
6=Current Proportioning -Reverse
7=Position Proportioning
(Reverse/Closed)
11 Output 2 Percent * o2uL 0 to 100 percent 100
Upper Limit (o2uL and
o2LL will not be seen
if out2 = 0,1,2,7)
12 Output 2 Percent * o2LL 0 to 100 percent 0
Lower Limit
13 Alarm 1 AL1 0=None 0
the Alarm Point 1=Process Alarm-Direct
is selected in the 2=Process Alarm-Revers
Tune mode 3=Deviation Alarm-Direct
4=Deviation Alarm-Reverse
5=Deviation Band Alarm-
Open within band
Note: Fault Detection is not
functional for 0-5V or
0-20mA inputs.