Parrot ZIKMU SOLO Скачать руководство пользователя страница 31

Страница: 31 / 31

Troubleshooting

Identification N. 394 149 496 R.C.S. PARIS
Parrot S.A.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that may cause undesired operation of the device

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the  FCC
Rules.  These  limits  are  designed to provide  reasonable  protection against  harmful  interference  in a residential  installation.
This equipment generates, uses and can radiate  radio frequency energy and,  if  not  installed and used in accordance  with the
instructions, may cause harmful interference to radio communications. However, there  is  no guarantee  that  interference  will
not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception,  which
can be  determined by turning the  equipment  off  and on,  the  user  is  encouraged to try to correct  the  interference  by one  or
more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

IC Compliance Statement

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  Digital  Device,  with  Industry  Canada
Licence-exempt RSS-GEN 7.1.3. These limits are designed to provide reasonable protection against  harmful  interference  in a
residential installation. This equipment generates, uses and can radiate  radio frequency energy and,  if  not  installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or
television reception, which can be  determined by turning the  equipment  off  and on,  the  user  is  encouraged to try to correct
the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment.. The
antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all
persons and must not be collocated or operating in conjunction with.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.