Parrot ZIKMU SOLO, Руководство пользователя

Страница: 28 / 31

28
Troubleshooting
Troubleshooting
.........................................................................................................................................................
Resetting the Parrot Zikmu Solo
If you have already configured your Parrot Zikmu Solo for Wi-Fi use and want to reset the Wi-Fi parameters to their factory
settings, remove the front grid and hold down the button.
If you are having an issue with an audio player connected to the Parrot Zikmu Solo via B luetooth:
1. Turn off the audio player.
2. Remove the front grid and hold down the
button.
3. Reestablish the B luetooth connection between the Parrot Zikmu Solo and the audio player.
If you are having an issue with your Parrot Zikmu Solo and need to reboot the speaker, remove the front grid and press the
Reset button.
If you want to restore the Parrot Zikmu Solo factory settings, hold down the Wi-Fi and the Bluetooth button until the 4 leds of
the control panel blinks.
Note: These resets can also be done using the web interface.
Pairing the remote control
If the Parrot Zikmu Solo remote control does not seem to work :
1. Make sure the battery is correctly installed.
2. Restart the Parrot Zikmu Solo.
3. Press the
SOURCE and buttons simultaneously on the remote control. You have one minute to perform this action
once the Parrot Zikmu Solo is turned on.
> The
,
and lights blink simultaneously to indicate that the pairing was successful.
Note: The pairing of the remote control is necessary after a reset of the speaker (long press on the Reset button)