Use cases
•
Streaming Audio from a PC (A2DP profile). Refer to the “Using the Parrot
Bluetooth
USB
Dongle” section for more information.
•
Streaming audio from any kind of audio player with the Jack socket (Jack-Jack audio cable
supplied)
•
Streaming Audio from a mobile phone / PDA / Smartphone (A2DP profile)
NOTE: IF YOU WANT TO FIND OUT WHICH DEVICES ARE EQUIPPED WITH THE A2DP TECHNOLOGY, VISIT
THE SUPPORT SECTIONON OUR WEBSITE AT WWW.PARROT.COM
Setting up the Parrot DS1120
1. Selecting a place for the Parrot DS1120
The Parrot DS1120 is designed to be placed on a desk, a table or a stable shelf. To get the best
possible sound performances, we advise you to respect the following recommendations:
• Make sure that you correctly installed the speakers at their respective positions (the “Right”
and “Left” labels are located on the back of the speakers).
• Install your speakers at the same distance from the listening point.
• Make sure there are no obstacles between the speakers and you. Avoid corners if possible.
• Turn the speakers towards the listening point by establishing a 60 degree angle (refer to the
diagram) as most of the stereo recordings are realized for this configuration.
• Install your speakers at ear level: by doing so, the frequency response will be optimal.
• To get the best possible reproduction of the bass frequencies, make sure there is a minimal
distance of 40 cm between the back and lateral walls and the speaker. Bass frequencies will
get louder if you place your speakers closer to the walls.
Optimal conditions
• 1 = 2 = 3
• 4 > 40 cm
• 5 ~ 60°
